Maytag a608
Bent it up on the bench vise by hand.
Total images:
27
| Last update:
7/21/10 4:53 PM
|
Help
.JPG)
.JPG "First I tried softening the plastic..."){kind=small}
.JPG "Back tracking a bit, I have to say..."){kind=small}
.JPG "Over the past 32 years, I've replaced..."){kind=small}
.JPG "The inner tube had to wrap three..."){kind=small}
.JPG "I began looking at how best to grab..."){kind=small}
.JPG "Although the Agi-Tamer..."){kind=small}
.JPG "Tapered the ends in just a bit, to..."){kind=small}
.JPG "I gave it a go with my wimpy Harbor..."){kind=small}
.JPG "So I laid aside the slide hammer, and..."){kind=small}
.JPG "With a bit of all-thread and some..."){kind=small}